A little break from hobby and gunpla… Just received the Bluray first press of the 2nd episode of Gundam Unicorn anime.
Enjoy ^_^
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Gundam MSN-06S Sinanju Ver. Ka – First stage completed
Here’s the photos as promised, enjoy!
 |
 |
 |
 |
 |
 |
 |
 |
Gundam MSN-06S Sinanju Ver. Ka – Legs thrusters
 |
Last part for the frame the legs thrusters.
Same color scheme, Dark grey, Steel Metallic paint for the brush and silver ink pen for the details. Like the other thrusters I painted the tanks in blue with a yellow line and I applyed an old Macross VF1B valky decal. Ewhaust of the thrusters are apinted with Steel metallic color and detaiuls are added inside for a more realistic look. |
 |
Now I’am going to put all the pieces together and take some photos of all the frame ^_^ |
Gundam MSN-06S Sinanju Ver. Ka – Feet
 |
No special things for the feet exept for the lifting jack at the rear.
This part receive the usual dark grey paint and theSteel Metallic brush but, to add a more realistis lifting jack look, I paint the sliding part with the silver ink pen. Ankle joints are painted with normal Steel Metallic paint and some panel lines are added. |
 |
Here the foot with the leg ^_^ |
Gundam MSN-06S Sinanju Ver. Ka – Legs
 |
No mod for the legs, just the usual paint job
Dark grey and Steel Metallic brush for the whole parts. Rear thruster acording to the same blue/yellow sheme and back knee pipes white/copper. Everything panel-lined with black ink. |
 |
Some sort of screws are painted with silver ink pen to increase mechanic look. |
 |
Here the details for the rear thruster and the back knee pipes. |
Gundam MSN-06S Sinanju Ver. Ka – Hands mod
 |
For the hands the basic mod is to separate the tree last figers that usually are stuck together. You can cut between each fingers and sand a little to eliminate some little stuff. This mod can be used in most of the hands of modelkits and so you will be able to use more realistics poses. |
 |
Hands are complete painted brushed and panel-lined, enjoy ^_^ |
Gundam MSN-06S Sinanju Ver. Ka – Waist
 |
Parts painted and brushed with Steel Metallic paint again. Every details are made with black ink, Steel Metallic paint and silver pen. Special effects will be added to both side an rear parts of armor. |
 |
Side parts have thrusters so I applyed the same color scheme as the other thrusters blue and yellow tank-like paint. |
 |
Rear parts have a lot of details to be made. Screws an vents are painted with silver ink pen. Piston-like parts are painted with both silver and copper ink pens. The pipe on the side of the part is painted with white like all the others pipes in the model kit and the fasteners are painted with copper ink according to the others parts too. |
 |
Here a view of all the waist parts. |
Gundam MSN-06S Sinanju Ver. Ka – Arms
 |
The work on the arms is now over.
Same basic paint but less brushed with the Steel Metallic color as I wanted a more shiny effect. The central parts of the shoulders bindings are painted with Steel Metallic color and are panel lined in black. |
 |
Some details of small parts that represent cylinders are apinted with the same color and detailled with copper color to make the cylinders more réalistics.
The pipes are painted in white that, for me, looks better than copper or grey colors. However each ends of the pipes are painted in copper like they are fixed with metallic parts. All parts are panel lined with black ink and some details are added with Steel Metallic paint or black paint. |
Gundam MSN-06S Sinanju Ver. Ka – Shoulders
No specific upgrade for the shoulders.
There is 2 parts, shoulders and shoulders thrusters.
Shoulders receive usual paiting Dark grey and will be brushed with Steel Metallic color.
Same paint work as the jetpack thrusters for the shoulders thrusters. I made a sort of blue fuel tank with a yellow line. I don’t make a real fuel tank like for the jetpack, putting putty inside holes, the holes there are made to put in place the armor, they are essential so you need to let them empty.
As I don’t have yellow pen, I made the yellow line with some very diluted yellow paint.
Applying that with a thin brush make the diluted paint fit all along the line capillary way.
I put the exhaust on each plots, made the details with silver ink and lines with black pen.
There’s the result ^_^
Gundam MSN-06S Sinanju Ver. Ka – Upper body paint
 |
Today let’s have a look at the upper body parts. The upper body has 2 main parts. The top part where the neck and head is fixed will be painted in dark grey then brushed with the Steel Metallic color. All the details are made this black ink. In this top part there is 2 tubing each side of the shoulders. Theses tubing will be painted in white like the tubing of the jetpack.
|
 |
The bottom part of the body receive the same colour anf brush as the top part.
Details are black inked too exept for 2 sort of intakes, 2 big details at the bottom and some screw-like details that are painted with silver ink.
|
